MATERIAL DETECTION Capillary Rheometer Establish basic polymer information through scientific methods. By comparing the material properties,...
CO-EXTRUSION FEEDBLOCK SIMULATION A Good feed-block design can provide more diversified co-extrusion processing for the machine, and improve the adjustment flexibility...
INTERFACE OF CO-EXTRSUSION Simulate multi-layer film or sheet productions to check the polymer interface whether occurs “ viscosity...
Co-Extrusion Simulation For Muti-Manifold Die Via inner flow design, the polymer can achieve expected layer distribution, compatibility and thickness of final product.
uniformity UNIFORMITY OF DIE EXIT According to different polymer and production conditions, design the...
DIE PRESSURE The maximum pressure of the die falls at the inlet. It will descend sequentially from the main flow...
STREAMLINE DISTRIBUTION Visible Streamline Schematic Diagram The polymer fluid is replaced by many simple lines, indicating the flow path of the...
RESIDENCE TIME Shortening the residence time of polymer in die can reduce plastic degradation risks. Once the plastic degrades,...
SHEAR STRESS SHEAR RATE Simulate the shear changes of the plastic in the die Too low shear stress will cause plastic...
Radius angle measuring instrument—DS-3NL Used for gauge extrusion die lip, ensure the radius angle is qualified, the standard is around 50um, for optical sheet and film...
Two-dimensional height gauge-Micro-Hite 600 Used for measuring Straightness, flatness and verticality of extrusion die, also for measuring length, gap, groove width, inner...
Surface roughness instrument-Mitutoyo SJ It is used for measure roughness of cylinder surface (ex: roller), roughness of flat (ex: extrusion die landing area), even...
Coating thickness gauge-LZ-370 Used for measuring coating thickness of magnetic piece and non-magnetic metal, it includes full function of electromagnetic and eddy current...
Industrial endoscope Used for detecting or inspecting some part that is invisible to the eye, no need to stop the equipment or disassemble device. GMA uses...
Eccentricity corrector –MT526 Used for measuring concentricity and straightness of various shaft (such like as gear) Measurable precision of level is 0.005mm, Measurable...
international award
Actively invest in R&D and apply for patents
International Awards and Certificates
