GEAR PUMPS

POLYMER RESIN

Feature

  • Precision gear pump, ensure volume rate is over 98%, low reflow rate, reduce running mechanical thermal energy.
  • Reducing pulse from extruder, keeping stable output, avoiding from material loss, and extruder energy consumption.
  • The pressure between inlet and outlet is 250 bar
  • Optional frame, drive and control system.
  • Suitable for most plastic materials, excluding halogen-containing ones like PVC and PVDF.
  • Optional oil heating model, if customer require.
Catalog Download
Catalog Download
Add to inquiry cart
Add to
inquiry cart
SPECIFICATIONS
Application LD - PE, LLD - PE PC PMMA HI - PS
Viscosity ( Pas at 10 / sec. ) 1500 - 4000 1000 - 2500 2000 - 4000 2000 - 4000
Density at melt ( g / cm3 ) 0.73 1.08 1.09 0.93
  ( cc / rev. ) rpm kg / hr rpm kg / hr rpm kg / hr rpm kg / hr
JYP - 20 2.1 155/13.5 78/10.2 116/15.2 124/13.8
JYP - 22 4.7 155/30.5 78/23 116/34 124/31
JYP - 28 10.2 148/63 70/44 114/72 120/65
JYP - 36 25.6 132/140 62/100 104/165 110/150
JYP - 45 46.3 125/240 62/180 94/270 96/235
JYP - 56 92.6 107/410 62/360 85/490 92/450
JYP - 70 176 102/750 56/610 76/830 82/760
JYP - 90 371 87/1350 52/1200 66/1520 72/1410
JYP - 110 716 77/2300 42/1880 57/2520 62/2360
Application ABS GP-PS PP A - PET
Viscosity ( Pas at 10 / sec. ) 3000 - 5000 1500 - 2500 1000 - 2000 1300 - 2000
Density at melt ( g / cm3 ) 0.96 0.93 0.73 1.17
  ( cc / rev. ) rpm kg / hr rpm kg / hr rpm kg / hr rpm kg / hr
JYP - 20 2.1 109/12.5 157/17.5 156/13.6 158/22.3
JYP - 22 4.7 109/28 157/39 156/30.5 158/50
JYP - 28 10.2 107/60 142/77 151/64 145/100
JYP - 36 25.6 100/140 136/185 141/150 139/240
JYP - 45 46.3 86/216 122/300 125/240 128/400
JYP - 56 92.6 83/420 111/545 117/450 118/735
JYP - 70 176 77/740 102/950 106/775 107/1265
JYP - 90 371 67/1350 85/1680 96/1480 96/2415
JYP - 110 716 58/2260 67/2540 86/2550 86/4140